|
|
|
Congratulations , you have just purchased one of the finest spot cleaning guns available today. It is manufactured from the best available materials and parts, to TEKMAR’s high quality Standards. When used as directed it should provide years of trouble free service. For safe operation it is important to
understand that this is not a toy, it is a high powered airless spray gun,
which has the potential when not used
as directed, to cause a serious puncture wound. SAFE
OPERATING INSTRUCTIONS Never
point the gun at any part of your body or at any other person. Always
check electric cord for damage before using. If damaged do not effect
temporary repair. Only
use with adequate ventilation and always wear eye protection. Use
only approved cleaning solvents. Never spray flammable solutions into the
air. INSTRUCTION
FOR USE 1. Fill fluid bottle 4/5 full and replace
on gun. Squeeze trigger until gun
primes and fluid comes out
of the nozzle. 2. Place
garment to be cleaned on a clean absorbent cloth or exhaust surface. Direct a
jet of cleaning solvent through stain in a circular motion, until soil is
flushed through. 3. To
avoid ringing adjust nozzle to wide spray pattern and spray around wet edge
to feather out giving a
smooth transition from wet to dry. 4. Always test fabric in an
inconspicuous area to ensure color fastness. CARE
OF GUN No
routine maintenance of the gun is required, however to ensure it’s long life
never use with a corrosive
or water based cleaner (this will also void warranty). Periodically and if the gun is to
be stored for any period of time, drain it of any cleaning fluid and run a light machine oil
(3 in 1 type) for a few seconds . © 2000 by Tekmar-Technical Marketing, Ltd. |